SL632 AC170-250V Motion Detecting Switch

Overview：
Type：Three-wire infrared sensor switch
Voltage： AC170-250V 50HZ
Power：Bulb ≤1000W. CFL,LED lamp≤200W
This auto-control product is based on the infrared line technology.
When human enters the sensing range, the sensor detects the change of
human body infrared spectrum and the switch connects load automatically.
If human is moving within range of sensing, the switch will keep on.
Otherwise it will automatically turns off after delay time.
The switch is the latest product, representing science progress. Also
it’s the ideal one to replace mechanical, touch and acoustic switches.
Features：
■ Automatic Sensing: AC170-250V，automatically turns off after delay
time when human leaves the sensing range, controlled by relay.
■ Photosensitive Control (optional, default setting: Off): While
turning on photosensitive control, the switch will not sense during
daytime or when the light is strong.
■ Temperature Compensation (optional, default setting: Off)：In summer,
environment temperature raises to 30～32℃, which causes sensing
range shortening. The temperature compensation will make some
compensation for it.
■ Triggering in two ways:
A .Unrepeatable triggering mode: After the sensor detects and outputs,
the switch will automatically turn off once the delay time is over.
B. repeatable triggering mode: After the sensor detects and outputs ,
if there is any motion of human within range during the delay time,
it will keep on outputting. Otherwise it will shut down when delay
time is over. Every time the module detects human motion the delay
time period will restart. And the last motion will be the start point.